STORE
AVAILABLE WORKS:
IMPORTANT: Please bare with me while I'm setting up my store.
contact me directly for all inquiries and showings at:
kyle@customtaylordcarpentry.com
or via phone 267-683-5666
RED OAK Entry TABLE
$400.00
(Private showings available upon request & availability - serious inquiries only please)
A smaller but taller table made from reclaimed red oak lumber taken from a demolition site in the Germantown neighborhood of Philadelphia, PA.
This piece would be excellent from an end table, entryway table, or a coffee bar (just to name a few).
The tabletop is a cut off from an old joist; the legs of the table are cut from former studs; and the lower shelf is a discarded slab of white oak flooring, stained to match.
The entire table has been stained and sealed with polyurethane.
Table construction was completed using mortis and tenon method; all joints have been glued for a strong, sturdy finish. A total of just 10 brad nails used to secure the lower shelf of the table were the only fasteners used in this construction.
Made from 100% Reclaimed wood Products
Wood Type: Red oak (some white oak)
​
DIMENSIONs - H: 30" || L: 27.5" || W: 9"
​
*NOTE: This piece Is one of a kind; custom furniture orders are available upon request & availability
Click individual images to see larger detail
WHITE OAK & EPOXY CHARCUTERIE BOARD #1
$150.00 (+ S&H)
White oak charcuterie board.
Made with wood from a fallen, thunderstruck white oak tree recovered from the Germantown neighborhood of Philadelphia, Pennsylvania.
Live edge filled with deep pour epoxy.
​
Finished with tung oil & Polyurethane
Food-serve safe
Hand and sink wash only; not dishwasher safe
​
DIMENSIONs - L: 15" || W: 12" || T: 0.5"
​
WOOD TYPE: White Oak (Philadelphia, PA)
EPOXY Color: Green
Black Painted Steel serving handles
*NOTE: This piece Is one of a kind; custom cut boards are available by inquiry - Contact me HERE
Click individual images to see larger detail
POPLAR CHARCUTERie board
$80.00 (+ S&H)
This piece has been hand cut to square its handling sides while maintaining the raw edge of the wood on both serving sides. The board has been finished with lacquer and is both scratch and water resistant.
(safe for HAND WASHING ONLY).
​
DIMENSIONs - L: 14.5" || W: 10.5" || T: 1"
​
*NOTE: This piece Is one of a kind; custom cut boards are available by inquiry
Click individual images to see larger detail
OUT OF STOCK:
GOLF CLUB COAT RACK
$100.00 (+ S&H)
SOLD
Made with professional Dunlop Neutron & Powerbilt golf clubs. The clubs have been secured to all-thread with epoxy and glued into a cut of reclaimed oak. Then, the final fastening occurring by attaching a lock washer and nut to the back of each club. The rear of the hanger has been capped with a secondary piece of wood- Maple- to keep all hardware and fasteners wholly out of sight.
Hanging hardware is already included, attached to the coat rack, and fully functional (see photos).
DIMENSIONs - H: 7" || W: 16" || D: 5.5"
Click individual images to see larger detail
AVAILABLE WORKS:
IMPORTANT: Please bare with me while I'm setting up my store.
contact me directly for all inquiries and showings at:
kyle@customtaylordcarpentry.com
or via phone 267-683-5666
RED OAK Entry TABLE
$400.00
(Private showings available upon request & availability - serious inquiries only please)
A smaller but taller table made from reclaimed red oak lumber taken from a demolition site in the Germantown neighborhood of Philadelphia, PA.
This piece would be excellent from an end table, entryway table, or a coffee bar (just to name a few).
The tabletop is a cut off from an old joist; the legs of the table are cut from former studs; and the lower shelf is a discarded slab of white oak flooring, stained to match.
The entire table has been stained and sealed with polyurethane.
Table construction was completed using mortis and tenon method; all joints have been glued for a strong, sturdy finish. A total of just 10 brad nails used to secure the lower shelf of the table were the only fasteners used in this construction.
Made from 100% Reclaimed wood Products
Wood Type: Red oak (some white oak)
​
DIMENSIONs - H: 30" || L: 27.5" || W: 9"
​
*NOTE: This piece Is one of a kind; custom furniture orders are available upon request & availability
Click individual images to see larger detail
Reclaimed Oak Dinner bench
$600.00 (+ S&H)
Wall-hanging coat rack made with 100% reclaimed materials.
The primary wood panel in this piece is a former piece of door jamb taken from a home demolition in the Fishtown neighborhood of Philadelphia, PA. The wood has been planed through numerous layers of paint to reveal its abstract finish.
Mahogany inlays taken from a porch demolition- also in Philadelphia- accent the piece; and the hooks themselves are cut from a steel railing taken from the same porch.
​​
Finished with tung oil & Polyurethane
Complete with hanging hardware (Shown in photos)
​
DIMENSIONs - L: 14" || W: 11" || T: 0.5"
​
WOOD TYPE: Pine (Philadelphia, PA)
Spanish Cedar (Philadelphia, PA)
Painted Black Steel
*NOTE: This piece Is one of a kind; custom orders are available by inquiry - Contact me HERE
Click individual images to see larger detail
WHITE OAK & EPOXY CHARCUTERIE BOARD #1
$200.00 (+ S&H)
White oak charcuterie board.
Made with wood from a fallen, thunderstruck white oak tree recovered from the Germantown neighborhood of Philadelphia, Pennsylvania.
Live edge filled with deep pour epoxy.
​
Finished with tung oil & Polyurethane
Food-serve safe
Hand and sink wash only; not dishwasher safe
​
DIMENSIONs - L: 15" || W: 12" || T: 0.5"
​
WOOD TYPE: White Oak (Philadelphia, PA)
EPOXY Color: Green
Black Painted Steel serving handles
*NOTE: This piece Is one of a kind; custom cut boards are available by inquiry - Contact me HERE
Click individual images to see larger detail
WHITE OAK & EPOXY CHARCUTERIE BOARD #2
$200.00 (+ S&H)
White oak charcuterie board.
Made with wood from a fallen, thunderstruck white oak tree recovered from the Germantown neighborhood of Philadelphia, Pennsylvania.
Live edge filled with deep pour epoxy.
​
Finished with tung oil & Polyurethane
Food-serve safe
Hand and sink wash only; not dishwasher safe
​
DIMENSIONs - L: 14" || W: 11" || T: 0.5"
​
WOOD TYPE: White Oak (Philadelphia, PA)
EPOXY Color: Green/Blue
Bronze serving handles
*NOTE: This piece Is one of a kind; custom cut boards are available by inquiry - Contact me HERE
Click individual images to see larger detail
Reclaimed Material coat rack #1
$100.00 (+ S&H)
Wall-hanging coat rack made with 100% reclaimed materials.
The primary wood panel in this piece is a former piece of door jamb taken from a home demolition in the Fishtown neighborhood of Philadelphia, PA. The wood has been planed through numerous layers of paint to reveal its abstract finish.
Mahogany inlays taken from a porch demolition- also in Philadelphia- accent the piece; and the hooks themselves are cut from a steel railing taken from the same porch.
​​
Finished with tung oil & Polyurethane
Complete with hanging hardware (Shown in photos)
​
DIMENSIONs - L: 14" || W: 11" || T: 0.5"
​
WOOD TYPE: Pine (Philadelphia, PA)
Spanish Cedar (Philadelphia, PA)
Painted Black Steel
*NOTE: This piece Is one of a kind; custom orders are available by inquiry - Contact me HERE
Click individual images to see larger detail
POPLAR CHARCUTERie board
$80.00 (+ S&H)
This piece has been hand cut to square its handling sides while maintaining the raw edge of the wood on both serving sides. The board has been finished with lacquer and is both scratch and water resistant.
(safe for HAND WASHING ONLY).
​
DIMENSIONs - L: 14.5" || W: 10.5" || T: 1"
​
*NOTE: This piece Is one of a kind; custom cut boards are available by inquiry